Sullair Compressed Air Solutions Two-Stage Rotary Screw Air Compressors

• Multi-Stage Air-Fluid Separation
  • Dual nested Optimizer™ separator elements, reduce fluid carryover to a maximum of 1 ppm
  • Reduced carryover lowers make-up fluid costs
  • Pleated Optimizer elements lower initial pressure drop for greater efficiency and extends element life
  • Easy to change with built-in lid lifting device
• Fiberglass Fluid Filter
  • Aircraft-quality media provides better filtration
  • Up to 20% more efficient than conventional paper elements
  • Lengthens life of the compressor
• Optimalair® Heavy-Duty Air Intake Filter
  • Includes remote air intake connection
  • Provides finest inlet filtration in the industry (0.4 microns using Fine Fiber Technology)
  • Keeps fluid clean and extends life of other internal components
  • Reduces pressure drop throughout the operating life, resulting in energy savings
• Two-Stage Compressor Air End
  • Delivers more air
  • Reduces power consumption
  • Extends air end bearing life
• Enhanced Serviceability for Air-Cooled Oil Cooler and Aftercoolers
  • Easy to remove panels provide access for cleaning coolers
• Motor Coupled to Air End Through Non-Lubricated, Flexible Coupling
  • Allows use of standard NEMA frame motor
  • Simplifies installation and start-up
• Variable Capacity Control System Featuring Spiral Valve Technology
  • Lowers part-load operating costs
  • Reduces cycling duty on package
  • Maintains consistent plant pressure
  • Simple control
  • Reduces bearing load
• Sullair Supervisor™ Controller
  • Computer-compatible microprocessor controller has simple graphic illustration of monitored functions and an easy-to-read keypad
  • Constant readout of pressure and temperature
  • On-demand readout of all operating and maintenance conditions
  • Monitors key functions and safety shutdowns
  • Power failure auto restart
  • Dual control, provides automatic start-stop operation
  • Lead-lag and sequencing with multiple compressors
  • Service and preventive maintenance schedule
  • Hours are recorded for “Run,” “Loaded” and “Consumable Parts”
  • Fault history with sensor readings
  • “Help” key provides built-in troubleshooting
• Easy Maintenance
  • Access to all critical components even with a sound enclosure installed
• Time Proven End-to-End Design
  • Reduces pressure drop through stages
  • Easy serviceability
• NEMA 4
  • Wye Delta starter for softer start
• Bearing Fluid Reservoirs
  • Ensure that fluid is available at start-up
  • Extend air end life
• Genuine Sullube® Factory Fill
  • A 10,000-hour extended-life synthetic fluid powered by Dow technology, Sullube has been used in more than 50,000 compressors worldwide
• Sullair 10-Year Diamond Warranty*

*Maintaining the Sullair 10-Year Diamond Warranty requires using Genuine Sullair parts and fluids, as well as the oil sampling program.

Options:

• PristineFG™
  • Food Grade Designed specifically for compressors used in food, beverage and pharmaceutical applications and meets FDA and USDA H-1 requirements
• Variable Speed Drive (VSD) 

Available models

60 Hz

• TS-20—150 to 250 hp (112 to 186 kW), 616 to 1200 acfm (17.4 to 33.9 m³/min), 100 to 175 psig (6.8 to 12 bar) 
• TS-32—200 to 350 hp (149 to 261 kW), 1100 to 1875 acfm (31.1 to 53.1 m³/min), 100 to 175 psig (6.8 to 12 bar)
• TS-32S—400 to 600 hp (298 to 447 kW), 1681 to 3000 acfm (47.6 to 84.9 m³/min), 100 to 150 psig (6.8 to 10.3 bar)
• V-320TS—200 to 450 hp (149 to 336 kW) Variable Speed Drive (VSD), 945 to 2310 acfm (26.7 to 65.4 m³/min), 100 to 150 psig (6.8 to 10.3 bar)

50 Hz

• TS-20—150 to 250 hp (112 to 186 kW), 590 to 990 acfm (16.7 to 28.0 m³/min), 100 to 175 psig (6.8 to 12 bar)
• TS-32—200 to 350 hp (149 to 261 kW), 1021 to 1845 acfm (28.9 to 52.3 m³/min), 100 to 175 psig (6.8 to 12 bar)
• TS-32S—400 to 600 hp (298 to 447 kW), 1942 to 2900 acfm (55.0 to 82.1 m³/min), 100 to 150 psig (6.8 to 10.3 bar)