x
x
Cisco Equipment, Texas and New Mexico

Furukawa Rock Drill USA HCR900-ESV

Furukawa Rock Drill USA HCR900-ESV for sale at Cisco Equipment, Texas and New Mexico

Double tap to zoom

Furukawa Rock Drill USA HCR900-ESV for sale at Cisco Equipment, Texas and New Mexico

 

Features

  • The Furukawa HD818 drifter (patent applied for) is designed to minimize drill noise and vibration, while increasing percussion frequency by 24% versus the HD709 drifter, its predecessor.
  • Ergonomically designed to minimize operator fatigue. The engine, compressor and hydraulic oil temperature gauges are highly visible, allowing the operator to monitor machine functions while remaining focused on the drilling.
  • The dust collector is equipped with an effective pre-cleaner that has the same suction capacity as previous models and reduces drilling dust leakage. An optional water/dust suppression system is available for difficult drilling conditions.
  • Low emission, Tier-IV Cummins® engine meets strict North American exhaust emissions regulations.
  • Rod changer with proven design allows for the install of four drill steels plus one starter rod.
  • Winch-ready frame adds application versatility.

Specifications

WEIGHT & DIMENSIONS US Standard
Overall Weight (A) *1 24,317 lb
Overall Weight (B) *2 24,978 lb
Overall Length 32'7"
Shipping Length 31'10"
Overall Width 10'8"
Shipping Width 8'5"
Overall Height 9'6"
Shipping Height 9'6"
DRIFTER
Model HD818
Weight 445 lb
Length 3'7"
Width 1'2"
Height 0'11"
Number of Blows 2,800 ~ 3,400 bpm
Rotating Speed 0 - 200 rpm
ENGINE
Make & Model Cummins® QSB6.7 (Tier4 Final, Stage IV)
Type Diesel, Water-Cooled, 6 Cylinders
Piston Displacement 408.9 cu in
Power Output 225.3 hp / 2,200 rpm
Fuel Capacity 84.5 gal
DEF Capacity 5.0 gal
UNDERCARRIAGE
Track Length 10'0"
Track Length on Ground 7'11"
Track Width 0'12"
Ground Contact Pressure *3 10.8 psi
Ground Clearance 1'10"
Frame Oscillation Angle ±10°
Tramming Speed 0 - 2.2 mph
Gradeability 57.7% (30°)
Maximum Traction Force 16,636 lb-force
BOOM
Model JF326
Type Extension
Boom Lifting Angle: Up/Down 45°/15°
Boom Swing Angle: Right/Left 37° / 43°
Boom Slide Length 4'11"
GUIDE SHELL
Model GH831
Overall Length 25'3"
Feed Length 14'8"
Feed Type Hydraulic Motor Driven Chain
Guide Slide Length 3'11"
Guide Swing Angle: Right/Left 40° / 40°
Guide Tilt Angle 180°
Maximum Pulling Force 6,407 lb-force
Feed System Motor Chain
COMPRESSOR
Make & Model AIRMAN PDS265-S37B
Type 1-Stage Screw Compressor
Discharge Airflow 215 cfm
Discharge Pressure 149 psi
DUST COLLECTOR
Model A884-221
Suction Capacity 706 cfm
Number of Filter Elements 4
Dust Removal System Automatic Air Pulse Jet
Suction Cap Slide Type
ROD ARRANGEMENT
Model -
Type Rack
Number of Rods 4 + 1 (Starter Rod)
Rod Diameter 1.3", 1.5", 1.8"
Number of Control Levers -
ELECTRICAL EQUIPMENT
Battery 12V; 108Ah/5hr
Light 24V; 70W x4
Voltage DC 24V
BIT AND ROD
Bit Range 2.5" - 3.5"
Rod Diameter 32H, 38R, 45R, (38H)
Rod Length 10' or 12'
Starter Rod Length 14'
The contents of these specifications are subject to change without notice.
Note:
*1  “Overall Weight (A)” includes weights of fuel and oils (full).
*2  “Overall Weight (B)” includes weight of “Overall Weight (A)”, operator, rod and bit.
*3  “Ground Contact Pressure” is calculated based on “Overall Weight (A)”.

NEED A QUOTE?

Let us help you get moving.