x
x
Cisco Equipment, Texas and New Mexico

Furukawa Rock Drill USA HCR1800-EDII

Furukawa Rock Drill USA HCR1800-EDII for sale at Cisco Equipment, Texas and New Mexico

Double tap to zoom

Furukawa Rock Drill USA HCR1800-EDII for sale at Cisco Equipment, Texas and New Mexico

 

Features

  • Low-emission Tier IV CAT® engine offer low fuel consumption and meets US exhaust emissions regulations.
  • Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a single lever.
  • HCR1800-EDII features 12′ or 14′ rods with extendable boom for increased drill pattern.
  • Heavy-duty undercarriage – featuring a pentagonal section design to reduce dirt build-up and track wear – ensures strength and durability.
  • High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
  • Reliable dust control system increases suction capacity and provides effective pre-cleaner to reduce escape of drilling dust. An optional dust suppression system is available for difficult drilling conditions.
  • Choose from an HD828 or HD836 drifter to meet your specific application needs.

Specifications

HCR1800-ED Series II ED-828 ED-836
PERFORMANCES US Standard US Standard
Operating Weight with Fuel/Oil 46,960 lbs. 46,960 lbs.
Travel Speed 0 - 2.1 mph 0 - 2.1 mph
Maximum Traction Force 28,550 lb-force 28,550 lb-force
Maximum Grade of Hill Climb 57.4% (30°)
Oscillating Angle ±7.5°
Ground Contact Pressure 15.3 psi 15.3 psi
DRIFTER
Model HD828 HD836
Mass 728 Ibs. 904 Ibs.
Overall Length 5'3" 5'5"
Overall Width 1'3" 1'4"
Overall Height 1'1" 1'3"
Number of Blows 2,700 - 3,300 bpm 2,600 - 3,100 bpm
Number of Revolutions 0 - 190 rpm 0 - 150 rpm
ENGINE
Make & Model CAT® C9.3 (Tier4 Final, Stage IV)
Type Diesel, Water Cooled, 6 Cylinders
Rated Output 350 hp/2,200 rpm 350 hp/2,200 rpm
HYDRAULIC EQUIPMENT
Variable Displacement Pump Axial Piston Pump x 2
Fixed Displacement Pump Gear Pump x 3
Drive Motor Hydraulic Motor with Reduction Gear
BOOM
Model JE326-14
Type Extension Boom
Boom Lifting Angle: Up/Down 40°/20°
Boom Swing Angle: Right/Left 30°/0°
Boom Slide Length 2'11" 1'11"
GUIDE SHELL
Model GH832-4
Overall Length 28'6" 28'6"
Feed Length 17'2" 17'2"
Guide Slide Length 4'11" 4'11"
Guide Swing Angle: Right/Left 25˚/90˚
Guide Tilt Angle 170°
Maximum Pulling Force 7,640 lb-force 7,640 lb-force
Feed System Chain Driven by Hydraulic Motor
COMPRESSOR
Make & Model Airman PDSF290-S16
Type Screw 1-Stage
Discharge Airflow 477 cfm 477 cfm
Discharge Pressure 149 psi 149 psi
DUST COLLECTOR
Model A885-44
Airflow 1,413 CFM 1,413 CFM
Number of Elements 6
Dust Removal System Automatic Air Pulse Jet
Suction Cap Slide Type
ROD CHANGER
Model GR803-1
Number of Rods 7 or 6 (GT60 - 87 mm/4.5" Tube)
Rod Length 12' ( 14' for ST58 and GT60 )
ELECTRICAL EQUIPMENT
Battery 12V; 160Ah/5h x 2
Voltage DC24V
FUEL/OIL CAPACITY
Diesel Fuel 158 gal / 600 Litter
Hydraulic Oil 63 gal / 240 Litter
DEF 9 gal / 34 Litter
BIT AND ROD
Bit Diameter 3.5" - 5" 4" - 5.5" (6")
Rod Size T51, ST58 ST58, T60, GT60
GT60 Tube (Dia. 87 mm/3.5")
Rod Length 12' (or 14' for ST58 ) 14'
First Rod Length Maximum 14' 18'
CIRCUMSTANCE
Ambient Temperature Range 5° – 113° F 5° – 113° F
Maximum Altitude Max. 8,202 ft Max. 8,202 ft

 

The contents of these specifications are subject to change without notice.
CAT is a registered trademark of Caterpillar, Inc.

NEED A QUOTE?

Let us help you get moving.