x
x
Cisco Equipment, Texas and New Mexico

Furukawa Rock Drill USA HCR1800-D20II

No Image Available
No Image Available

 

Features

  • Longer guide shell accommodates a 20′ starter rod
  • Field proven rod changer holds four 20′ extension rods
  • Travelling centralizer keeps rod from warping
  • Equipped with the newly developed HD828 drifter, offering a blow range of 2700-3300 bpm
  • High-efficiency 477 cfm air compressor, capable of cleaning up to a 5″ hole diameter
  • Ergonomically designed wide cabin offers comfortable work environment

Specifications

HCR1800-D20 Series II HD828
Operating Weight with Fuel/Oil 45,062 lbs.
Overall Length 33'12"
Shipping Length 36'11"
Overall Width 12'9"
Shipping Width 8'1"
Overall Height 11'8"
Shipping Height 10'11"
DRIFTER
Model HD828
Weight 597 lbs.
Length 3'9"
Width 1'3"
Height 1'1"
Number of Blows 2,700 - 3,300 bpm
Rotating Speed 0 - 190 rpm
UNDERCARRIAGE
Track Length 12'1"
Track Length on Ground 9'5"
Track Width 1'1"
Ground Contact Pressure *3 15.3 psi
Ground Clearance 1'10"
Frame Oscillation Angle ±7.5°
Tramming Speed 0 - 2.2 mph
Gradeability 57.4% (30°)
Maximum Traction Force 28,551 lb-force
ENGINE
Make & Model CAT® C9.3 (Tier4 Final, Stage IV)
Type Diesel, Water-Cooled, 6 Cylinders
Piston Displacement 567 cu in
Power Output 350 hp / 2,200 rpm
Fuel Capacity 158.5 gal
DEF Capacity 9.0 gal
HYDRAULIC EQUIPMENT
Variable Displacement Pump Axial Piston Pump x2
Fixed Displacement Pump Gear Pump x3
Drive Motor Hydraulic Motor with Reduction Gear
Hydraulic Oil Reservoir Capacity 63.4 gal
BOOM
Model JF325-142
Type Fixed
Boom Lift Angle (Up / Down) 40° / 25°
Boom Swing Angle (Right / Left) 35° / 1°
Guide Rotary Angle 90°
GUIDE SHELL
Model GH830-52
Overall Length 33'12"
Feed Length 22'6"
Feed Type Hydraulic Motor Driven Chain
Guide Slide Length 4'11"
Guide Swing Angle (Right / Left) 25° / 90°
Guide Tilt Angle 170°
Maximum Pulling Force 6,969 lb-force
COMPRESSOR
Make & Model AIRMAN PDSF290-S16
Type 1-Stage Screw Compressor
Discharge Airflow 477 cfm
Discharge Pressure 149 psi
DUST COLLECTOR
Model A885-44
Suction Capacity 1,413 cfm
Number of Filter Elements 6
Dust Removal System Automatic Air Pulse Jet
Suction Cap Slide Type
ROD CHANGER
Model GR801-52
Number of Rods 4
Rod Diameter 2"
Number of Control Levers 1
BIT AND ROD
Bit Range 3.5" - 5"
Rod Type T51 / ST58
Rod Length 20'
Starter Rod Length 20'
ELECTRICS
Battery 12V; 160Ah/5hr x2
Light 24V; 70W x4
Voltage DC 24V
OPERATING ENVIRONMENT
Working Temperature 5° - 113° F
Maximum Altitude Max. 8,202 ft
The contents of these specifications are subject to change without notice.
*3 “Ground Contact Pressure” is calculated based on “Overall Weight (A)”.
CAT is a registered trademark of Caterpillar, Inc.
AIRMAN is a registered trademark of HOKUETSU INDUSTRIES CO., LTD.

NEED A QUOTE?

Let us help you get moving.