Cisco Equipment, Texas and New Mexico

Furukawa Rock Drill USA HCR900 SERIES II

Furukawa Rock Drill USA HCR900 SERIES II for sale at Cisco Equipment, Texas and New Mexico

Double tap to zoom

Furukawa Rock Drill USA HCR900 SERIES II for sale at Cisco Equipment, Texas and New Mexico



  • Maximize operator performance with the ultimate in drilling technology.
  • Ergonomically designed to minimize operator fatigue.
  • Stable chassis combining a low center of gravity, high ground clearance and protected undercarriage enhances stability and confidence when tramming and drilling on rough terrain.
  • Single-lever drilling controls allow easy operation of the drifter.
  • Sliding suction cap can be raised to allow a fast visual check of operation.
  • Walk-around, ground-level maintenance provides fast, easy upkeep or repair. Hinged service doors provide easy access to required areas.
  • Engine, compressor and hydraulic oil temperature gauges are highly visible, allowing the operator to monitor machine functions while remaining focused on the drilling.
  • Extension boom increases drilling pattern flexibility.
  • Design versatility allows for drilling either horizontally or vertically.
  • High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
  • Upgraded dust collector has higher suction capacity than previous models. Dust collector includes an effective pre-cleaner to reduce escape of drilling dust. An optional dust suppression system is available for difficult drilling conditions.
  • Low-emission, Tier III Caterpillar engine offers low fuel consumption and meets major exhaust emissions regulations in Europe and the United States.
  • Heavy-duty Furukawa undercarriage featuring a pentagonal section design to reduce dirt build-up and track wear ensures strength and durability.
  • HCR900 ES20 is ideal when drilling requirements exceed 12′. Depths up to 18′ can be drilled without changing rods.
  • Angle indicator for quick and easy drilling alignment.


Models HCR900-ES II HCR900-ES II 20
Operating Weight with Fuel/Oil 22,645 lb (10,270 kg) 24,096 lb (10,930 kg)
Overall length 32'-0" (9,750 mm) 33'-3" (10,150 mm)
Ground contact length 7'-11.5" (2,425 mm)
Overall width with pre-cleaner 10'-7" (3,220 mm)
Overall width 7'-10" (2,390 mm)
Width of shoe 11.8" (300 mm)
Overall height shipping 8'-11.5" (2,730 mm)
Model HD709
Weight 408 lb (185 kg)
Impact rate 2,250 - 2,500 bpm
Number of rotations 0 - 250 rpm
Ground clearance 21.65" (550 mm)
Oscillating angle ±10° deg
Travel speed 0 - 2.2 mph (0 - 3.5 km/h)
Max grade of hill climb 57.7 (30°) %
Make/model CATERPILLAR® / C7
Type Turbocharged and air to air after cooled diesel, direct fuel injection, electronic governor
Rated output 225hp / 2,200rpm 168kw / 2,200rpm
  Meets Tier III and EU stage-3 
Low-emission, low fuel consumption Tier III Caterpillar® engine meets major exhaust emissions regulations in US and Europe.
Piston displacement 2 gal (7.2 liter)
Fuel tank capacity 87 gal (330 liter)
Type 2-variable displacement piston pumps supply pressure oil for both travel and drilling. 3-gear pumps for cooling and dust collector.
Hydraulic oil tank capacity 45 gal (170 liter)
Model AIRMAN® PDS265-S35B
Free air delivery 215.4 CFM (6.1 m3/min)
Working air pressure 149 psi (1.03 MPa)
Model JE326
Lift angle (up-down) 45° - 15°
Swing angle (right-left) 37° - 43°
Extension length 4'-10" (1,500 mm)
Model GH831  
Length 24'-8" (7,534 mm) 29'-3.5" (8,944 mm)
Feed length 14'-7" (4480 mm)
Swing angle (right-left) 40° - 40°
Tilt angle 180°
Maximum pulling force 6,407 lbs (28.5 kN)
Dust collector
Suction capacity 706 CFM (20 m3/min)
Number of filter 4
Type Rack
Number of rods 4
Bit diameter 2.5" - 3.5" (65 mm - 90 mm)
Type of bit Cross, Button, Spike
Rod size H32, R38, R45 (H38)
Rod length 10' - 12' (3,050 - 3,660 mm)
Starter rod length 12 or 13' (3,660 or 4,300 mm) 20' (6,100 mm)
The contents of these specifications are subject to change without notice.


Let us help you get moving.