x
x
Cisco Equipment, Texas and New Mexico

Furukawa Rock Drill USA HCR1200 Series II ED

Furukawa Rock Drill USA HCR1200 Series II ED for sale at Cisco Equipment, Texas and New Mexico

Double tap to zoom

Furukawa Rock Drill USA HCR1200 Series II ED for sale at Cisco Equipment, Texas and New Mexico

 

Features

  • Maximize operator performance with the ultimate in ergonomic cab designs.
  • HCR1200 ED cabs are ergonomically friendly with features that reduce operator fatigue. Cabs are 43″ (1,100mm) with ROPS/FOPS standard.
  • All cabs are air-conditioned and continuously pressurized with filtered air to maintain a comfortable operating environment.
  • Cabs are equipped with radio, bluetooth and USB port.
  • Rubber-mounted engine frame isolates cab from engine vibrations.
  • Single-lever drilling control for easy operation.
  • Large windows maximize operator visibility.
  • Walk-around ground level maintenance provides fast, easy upkeep or repair.
  • High-visibility gauges allow operator to monitor machine functions while remaining focused on the drilling.
  • Low-emission Tier III engines offer low fuel consumption and meets US exhaust emissions regulations.
  • Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a single lever. Rods can also be indexed in the rack to distribute wear evenly and reduce costs.
  • HCR1200 ED features 12′ rods with extendable boom for increased drill pattern.
  • Heavy-duty Furukawa undercarriage featuring a pentagonal section design to reduce dirt build-up and track wear ensures strength and durability.
  • High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
  • Reliable dust control system increases suction capacity and provides effective pre-cleaner to reduce escape of drilling dust. An optional dust suppression system is available for difficult drilling conditions.
  • Angle indicator for quick and easy drilling alignment.

Specifications

Model HCR1200 EDII
Operating Weight with Fuel/Oil 34,408 lb
Overall length 32'-9"
Ground contact length 9'-1.5"
Overall width with pre-cleaner 10'4"
Overall width 7'-10.5"
Width of shoe 13"
Overall height shipping 9'-9"
DRIFTER
Model HD712
Weight 485 lb
Impact rate 2,250 - 2,500 bpm
Number of rotations 0 - 190 rpm
UNDERCARRIAGE
Ground clearance 18.11"
Oscillating angle ±7.5° deg
Travel speed 0 - 1.9 mph
Max grade of hill climb 57.7 (30°) %
ENGINE
Make/model CUMMINS® / QSB 6.7
Type Turbocharged and air to air after cooled diesel, direct fuel injection, electronic governor.
Rated output 240hp / 2,500rpm
  Meets Tier III and EU stage-3 
Low-emission, low fuel consumption Tier III Cummins® engine meets major exhaust emissions regulations in US and Europe. 
Net usable output available at flywheel of the installed engine with all the standard accessories. SAEJ1349, SAEJ1995 conditions.
Piston displacement 1.7 gal
Fuel tank capacity 111 gal
HYDRAULIC PUMP
Type 2-variable displacement axial piston pumps; largest for travel, impact and feed, smaller for drifter rotation. 3-gear pumps for cooling and dust collector, boom and rod changer.
Hydraulic oil tank capacity 57 gal
COMPRESSOR
Model AIRMAN® PDS265-S32D
Free air delivery 275.2 CFM
Working air pressure 149 psi
BOOM
Model JE326-132
Lift angle (up-down) 45° - 20°
Swing angle (right-left) 35° - 5°
Extension length 3'-10"
GUIDE SHELL
Model GH832-30
Length 25'-6"
Feed length 15'-0"
Swing angle (right-left) 30° - 90°
Tilt angle 170°
Maximum pulling force 6,632 lbs
Dust collector
Suction capacity 1,058 CFM
Number of filter 5
ROD ARRANGEMENT
Type Rod changer
Number of rods 6 + 1 (starter rod)
BIT & ROD
Bit diameter 3" - 4"
Type of bit Cross, Button, Spike
Rod size 38H, 38R, 45R (51R)
Rod length 12'
Starter rod length 12' - 14'
The contents of these specifications are subject to change without notice.

NEED A QUOTE?

Let us help you get moving.