x
x
Cisco Equipment, Texas and New Mexico

Clark Material Handling GEX 40/45/50

Clark Material Handling GEX 40/45/50 for sale at Cisco Equipment, Texas and New Mexico

Double tap to zoom

Clark Material Handling GEX 40/45/50 for sale at Cisco Equipment, Texas and New Mexico

 

Features

Drive Motors & Axles

Fewer Parts & Minimum Wear = Less Downtime
Enclosed, brushless
Thermal and stall protection
Dual/powered reversing for tighter turns
Suitable for Wet Applications
Same motors for E & EE

Regen & Wet Disc Brakes

Three forms of Regenerative Braking
Accelerator release (Proportional to accelerator position)
Change of direction (Proportional to accelerator position)
Service brake (Foot brake)

Wet Disc Brakes
Enclosed and oil cooled for smooth, quiet operation
Built with long life lining material
Less downtime

80 Volt 100% AC System

High Performance
Rivals IC truck performance in speed, acceleration and gradeability

More Efficient System
Higher voltage = lower line loss & heating = greater efficiency

Better Suited to Rapid Charge
Only requires one receptacle via single battery connector

Increased Battery Capacity
GEX 40/45/50 can accommodate 72 kwh battery

Easily Serviced

Hinged Rear Control Cover
Supported on gas springs for easy service access from a standing position

On-Board Diagnostics
Allow servicing mechanic to check fault codes without service tool

Upright & Carriage

Maximum Visibility
Nested I-channel allows space for cylinders, hoses and chains

Hydraulic Cushioning Valve
Silent staging reduces shock and vibration

Shimmable, Sealed & Canted Rollers
Carriage has 6 rollers to maximize load distribution and reduce free play

Stable Platform

Low Center of Gravity
CLARK moved back the steer axle, dropped the battery compartment and moved all major components lower

Curve Cutback
Reduces truck travel speed in turns

Wide Stance
Provides excellent lateral stability

Powered Reversing Drive Motors

2-Wheel Drive
Provides added traction, especially on wet or uneven surfaces

Will Not Scuff Tires
Inside wheel power reverses in tight turns preventing scuffing of steer tires like conventional 4-wheel trucks

Hall Effect Steer Sensor
Relays steer tire position to control

LCD Dash Display

Fully Adjustable/Programmable
The operator can select from 4 pre-set performance modes

Alarm Codes
Indicates the current alarm code and stores previous alarm codes for quick access

Password Protected
Certain adjustments can be password protected to allow only authorized operators to make adjustments

Specifications

Manufacturer’s Designation GEX 40
Load Capacity / Rated Load lbs(kg) 8000 (4000)
Height Overhead Guard in(mm) 90.9 (2310)
Width in(mm) 55 (1396)
Right Angle Stack (add load length and clearance) in(mm) 127.7 (3244)
Outside Turning Radius in(mm) 105.3 (2675)
Travel speed loaded / unloaded mph (kph) 12.4 (20.0) / 13 (21.0)
Engine / Rated output per SAE J1349 80 Volt
   
Manufacturer’s Designation GEX 45
Load Capacity / Rated Load lbs(kg) 9000 (4500)
Height Overhead Guard in(mm) 90.9 (2310)
Width in(mm) 58.7 (1490)
Right Angle Stack (add load length and clearance) in(mm) 127.7 (3244)
Outside Turning Radius in(mm) 105.3 (2675)
Travel speed loaded / unloaded mph (kph) 11.8 (19) / 12.4 (20.0)
Engine / Rated output per SAE J1349 80 Volt
   
Manufacturer’s Designation GEX 50
Load Capacity / Rated Load lbs(kg) 10.000 (5000)
Height Overhead Guard in(mm) 90.9 (2310)
Width in(mm) 58.7 (1490)
Right Angle Stack (add load length and clearance) in(mm) 128.7 (3269)
Outside Turning Radius in(mm) 106.3 (2700)
Travel speed loaded / unloaded mph (kph) 11.8 (19) / 12.4 (20.0)
Engine / Rated output per SAE J1349 80 Volt

NEED A QUOTE?

Let us help you get moving.