x
x
Cisco Equipment, Texas and New Mexico

Chicago Pneumatic Power Tools & Compressors CP7748TL-2K

Chicago Pneumatic Power Tools & Compressors CP7748TL-2K for sale at Cisco Equipment, Texas and New Mexico

Double tap to zoom

Chicago Pneumatic Power Tools & Compressors CP7748TL-2K for sale at Cisco Equipment, Texas and New Mexico

 

Features

Benefits

Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse
One Hand Operation: 2 power setting positions
Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle
Low sound level
Suited for all light vehicle tire changing applications

Can be transportable as a tool box
Removable foam insert to be placed in a rolling cabinet drawer
High quality composite case supplied a bi-material handle and composite latches

Features

1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
920 ft.lbs - 1,250Nm of maximum torque in reverse
Aluminum clutch & rear housings
Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
Universal & durable twin hammer mechanism
Full teasing trigger
360° swivel air inlet

3 Wheel Sockets included / 17 – 19 & 21 mm
80 mm length, with anti-scratch protection, extra thin-walled for alloy rims, painted rims and polished cap nuts
High quality composite case supplied a bi-material handle and composite latches

The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly.
Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.

Specifications

Specification Metric Imperial
Model CP7748TL-2K  
Part number 8940173408  
Actual air consumption 10 l/s 22 cfm
Air inlet thread size 1/4 "  
Average air consumption 2 1/2 l/s 5 1/2 cfm
Blows per minute 850  
Clutch type Twin Hammer  
European Standards EN ISO 11148-6:2013  
Free speed 8200 rpm  
Handle type Pistol  
Length 250 mm 9.8 "
Maximum Torque (reverse) 1250 Nm 920 ft.lbs
Min. hose size 10 mm 3/8 "
Net weight 2.4 kg 5.3 lb
Power/weight ratio 520.8 Nm/kg 174 ft.lb/lb
Side to center 38 mm 1 1/2 "
Socket retainer Friction ring  
Sound Power 97 db(A)  
Sound pressure 86 db(A)  
Square drive 1/2 "  
Vibration 4.8 m/s²  
Vibration ISO ISO-28927-2  
Vibration uncertainty (K) 1 1/2 m/s²  
Working Torque Range (fwd) 90 - 96 Nm 66 - 70 ft.lbs

NEED A QUOTE?

Let us help you get moving.